Applications :
This pneumatic forging hammer is widely used for general Forging works, such as drawing-out, upsetting, punching, chiseling, forge, welding, bending and twisting. It is also used for forge in bolster dies.
Features of pneumatic forging hammer:
+ Ready operation: economic and convenient
+ Easy to operate, by manipulating the hand lever or foot-pedal, all operating functions—idle run, top setting, pressing down, single blow, light or full series blow can be obtained as desired
+ A special oil-pump is provided for lubricating the cylinders. Prior to running, turn the hand-crank of the pump to get the cylinders being lubricated beforehand.
|
Model |
C41-150 |
C41-250 |
C41-400 |
C41-560 |
C41-750 |
C41-1000 |
C41-2000 |
|
|
Weight of falling parts (kg) |
150 |
250 |
400 |
560 |
750 |
1000 |
2000 |
|
|
Maximum hit energy(kj) |
2.5 |
5.6 |
9.5 |
13.7 |
19 |
27 |
54 |
|
|
Hit number(min-1) |
180 |
140 |
120 |
115 |
105 |
95 |
80 |
|
|
Heigh of working area (mm) |
370 |
450 |
530 |
600 |
670 |
800 |
1000 |
|
|
Tup axis to frame front (mm) |
350 |
420 |
520 |
550 |
750 |
770 |
950 |
|
|
Dimension of top die surface |
200x85 |
220x100 |
250x120 |
300x140 |
330x160 |
365x180 |
400x300 |
|
|
Dimension of bottom die surface |
200x85 |
220x100 |
250x120 |
300x140 |
330x160 |
365x180 |
400x300 |
|
|
Forges |
Square (mmxmm) |
130x130 |
145x145 |
220x220 |
270x270 |
270x270 |
290x290 |
350x350 |
|
Round(mm) |
Φ145 |
Φ175 |
Φ240 |
Φ280 |
Φ300 |
Φ320 |
Φ400 |
|
|
Motor |
Type |
Y180M-4-B3 |
Y180L-4-B3 |
Y200L-4-B3 |
Y280S-6-B3 |
Y280M-6-B3 |
Y315S-6-B3 |
Y315L2-6-B3 |
|
Power(kw) |
18.5 |
22 |
30 |
45 |
55 |
75 |
132 |
|
|
Weight |
Hammer(kg) |
3260 |
5000 |
8000 |
9800 |
17000 |
20000 |
48000 |
|
Anvil block(kg) |
1500 |
2500 |
4800 |
6720 |
9000 |
13000 |
24000 |
|
|
Outside Size |
2390x 1085x 2150 |
2639x 1155x 2540 |
2785x 1400x 2884 |
3464x 1500x 3157 |
3905x 1370x 3175 |
4125x 1500x 3770 |
4200x 2300x 4390 |
|
